New Welding Table

  • Geno
  • Topic Author
  • Offline
  • Administrator Supporter
  • Administrator Supporter
    Super Users
  • Wheel Horse Stables Owner
More
25 Mar 2020 18:04 - 25 Mar 2020 18:23 #15851 by Geno
New Welding Table was created by Geno
This is where I've been hiding the past week. Countless hours of cutting and welding till bedtime in this little monster but it's gonna be a nice piece to have in the shop. It's a little short in the pics but I have 6" tall wheels that go on it, then it will be level with the other big one.

Sides are hinged with grease fittings, foldable and removable. Nothing will be mounted on the top of this one. I'm still waiting on some more 2 1/2" x 1/4" square tubing to put 8 mounts around the top like the other big one has so stuff can be slid into the tubes when needed. When that is done a vise, seats, grinder, etc will just slide into the tubes and lock like the side wings do. :thumb1

Table is 5' x 5', wings are 4' wide 18" deep.

Tomorrow is painting day and it should be rolling around in a day or two. :woo

Welcome to the Stables!
Last edit: 25 Mar 2020 18:23 by Geno.

Please Log in to join the conversation.

  • Geno
  • Topic Author
  • Offline
  • Administrator Supporter
  • Administrator Supporter
    Super Users
  • Wheel Horse Stables Owner
More
26 Mar 2020 16:44 - 26 Mar 2020 16:45 #15852 by Geno
Replied by Geno on topic New Welding Table
It may get some paint tonight. There was still a lot of cleanup and deburring to do but it just got done, I think lol. :laughing

I also got some pics of how simple the hinging system is when it's apart. The hinges just slide out of the bushings once the wing is out, no tools necessary. :thumb1

Welcome to the Stables!
Attachments:
Last edit: 26 Mar 2020 16:45 by Geno.

Please Log in to join the conversation.

  • Geno
  • Topic Author
  • Offline
  • Administrator Supporter
  • Administrator Supporter
    Super Users
  • Wheel Horse Stables Owner
More
28 Mar 2020 14:15 #15853 by Geno
Replied by Geno on topic New Welding Table
The shelf grating, the hardest part is painted. :whew

The shop and store orders have been going crazy so I'll prob do all of the black today and the red on Monday. Spring has sprung, it's 80 degrees here now, bring on the warm! :smile2

Welcome to the Stables!
Attachments:

Please Log in to join the conversation.

  • Geno
  • Topic Author
  • Offline
  • Administrator Supporter
  • Administrator Supporter
    Super Users
  • Wheel Horse Stables Owner
More
28 Mar 2020 16:10 - 28 Mar 2020 16:13 #15854 by Geno
Replied by Geno on topic New Welding Table
The rest of the black is done. My old tough IH Red implement paint with lead in it is going on the lower supports like the big welding table on Monday. :smile

Welcome to the Stables!
Last edit: 28 Mar 2020 16:13 by Geno.

Please Log in to join the conversation.

More
29 Mar 2020 11:53 #15855 by GT 14
Replied by GT 14 on topic New Welding Table
Where are you going to find room for the extra table, or did you sell the other.

1969 GT-18
1978 C-101
1983 C-225

Please Log in to join the conversation.

  • Geno
  • Topic Author
  • Offline
  • Administrator Supporter
  • Administrator Supporter
    Super Users
  • Wheel Horse Stables Owner
More
29 Mar 2020 17:29 #15856 by Geno
Replied by Geno on topic New Welding Table
I prob won't sell the other, I use it a lot and have a new 5x10x1/2 steel top for it. This one was made with the folding wings to take up less space in the shop when need be, and so I can roll it outside to enjoy the weather when working sometimes. I sold a few tractors and will be doing a little more rearranging soon, there is a little more room in the shop now. :thumb1

Welcome to the Stables!

Please Log in to join the conversation.

  • Geno
  • Topic Author
  • Offline
  • Administrator Supporter
  • Administrator Supporter
    Super Users
  • Wheel Horse Stables Owner
More
30 Mar 2020 15:57 #15857 by Geno
Replied by Geno on topic New Welding Table
The frame is painted and it is outside sunbathing lol. :smile2

Welcome to the Stables!
Attachments:

Please Log in to join the conversation.

  • Geno
  • Topic Author
  • Offline
  • Administrator Supporter
  • Administrator Supporter
    Super Users
  • Wheel Horse Stables Owner
More
30 Mar 2020 16:41 #15858 by Geno
Replied by Geno on topic New Welding Table
It has wings now so it can fly lol. :laughing

Welcome to the Stables!
Attachments:

Please Log in to join the conversation.

More
31 Mar 2020 09:28 #15859 by jm46322
Replied by jm46322 on topic New Welding Table
now comes the great debate in life.

what came first.

The WELDER ???????? or The WELDING TABLE ????????

John in Highland Indiana
self appointed chief mechanic at
WOODWARD FARMS
The following user(s) said Thank You: Geno

Please Log in to join the conversation.

  • Geno
  • Topic Author
  • Offline
  • Administrator Supporter
  • Administrator Supporter
    Super Users
  • Wheel Horse Stables Owner
More
31 Mar 2020 11:46 #15861 by Geno
Replied by Geno on topic New Welding Table
Don't you need a welder to build a welding table? :tounge2 :laughing

Welcome to the Stables!

Please Log in to join the conversation.

Time to create page: 0.379 seconds