Round Hood Tricycle Project
28 Apr 2020 18:07 #15913
by Geno
Replied by Geno on topic Round Hood Tricycle Project
2 more patterns done today. While the mill was set up it made sense to make several of the steering arm pieces (square tubing).
Welcome to the Stables!
Please Log in to join the conversation.
- JustinW.73
- Offline
- Super Moderator
-
Registered
- Small Engine Mechanic
Less
More
- Posts: 349
29 Apr 2020 21:31 #15916
by JustinW.73
1973 No Name 16
1966 856
1964 854
198? 520H
Way too many decks
1966 f100
Replied by JustinW.73 on topic Round Hood Tricycle Project
Looks good!
1973 No Name 16
1966 856
1964 854
198? 520H
Way too many decks
1966 f100
The following user(s) said Thank You: Geno
Please Log in to join the conversation.
08 May 2020 19:13 #15968
by Geno
Replied by Geno on topic Round Hood Tricycle Project
Well it is far enough along to see how the prototype works for real.
Welcome to the Stables!
Please Log in to join the conversation.
21 May 2020 18:19 - 21 May 2020 18:34 #16004
by Geno
Replied by Geno on topic Round Hood Tricycle Project
Finished up all the patterns and an extra set to tack together tomorrow and make sure it's perfect. If it works like it should it will get welded up and be ready to install. Still keeping the prototype for awhile as well.
It's been a long road with a lot of changes but it was still worth it.
It's been a long road with a lot of changes but it was still worth it.
Welcome to the Stables!
Last edit: 21 May 2020 18:34 by Geno.
Please Log in to join the conversation.
22 May 2020 19:57 #16007
by Geno
Replied by Geno on topic Round Hood Tricycle Project
Thanks GT.
If you look at the first 2 pics you'll see a difference. After that little mishap the first one is all together and works perfect.
If you look at the first 2 pics you'll see a difference. After that little mishap the first one is all together and works perfect.
Welcome to the Stables!
Please Log in to join the conversation.
22 May 2020 19:59 #16008
by Geno
Replied by Geno on topic Round Hood Tricycle Project
Time to weld it all up.
Welcome to the Stables!
Please Log in to join the conversation.
23 May 2020 17:46 #16010
by Geno
Replied by Geno on topic Round Hood Tricycle Project
All done and works like a charm.
It cut's shorter than it did originally, might have to get peeps to sign a waiver lol.
Gonna go on and move this out to the public section.
It cut's shorter than it did originally, might have to get peeps to sign a waiver lol.
Gonna go on and move this out to the public section.
Welcome to the Stables!
Please Log in to join the conversation.
Time to create page: 0.523 seconds