Starting Fluid - 520H Onan

More
28 Jan 2019 15:12 #15164 by GoBucks
Replied by GoBucks on topic Starting Fluid - 520H Onan
I just went out and tried it again. I think I did it right to begin with. That's just as closed as it gets without using my finger. I was able to start it ok with the choke slightly open though. Thanks

Please Log in to join the conversation.

  • Geno
  • Offline
  • Administrator Supporter
  • Administrator Supporter
    Super Users
  • Wheel Horse Stables Owner
More
28 Jan 2019 16:21 - 28 Jan 2019 16:25 #15165 by Geno
Replied by Geno on topic Starting Fluid - 520H Onan

GoBucks wrote: Should the choke close completely?

It doesn't bind, but doesn't want to close with the cable all the way. I adjusted it Saturday, then started it Ok Sunday, but it doesn't close completely. I also had in my mind your directions backwards. I choked it all the way, then loosened the nut, then pulled the choke down just a little, then pushed the choke closed with my finger, then tightened the nut.

https://lh3.googleusercontent.com/D7aglJEWTgknexHys4LljlrBkJ3rIu4YpoUb_3eETyGtqgFT5M7WFjZ5295lfGPcWSDzdnPBwhlfIwuISvXqgFhrg8yg3hH4Iz3y6D6FSm2Mye9ybYfO6iUsFVTXAmXeiIsIBJa_t1PplZkuxR-YTVoSJ9JZim2p0DtFjixYIh4Oi2AwY0sYBiT3HrBG9QSkgvOHTC0l-Th--Q0e7kDaiWUC3qDBhssDkNUj-LUoV_Biu7uPyUSQcp1B1IIiNwFSVm7WwOpTfeppje5_cCYDh-dWCMrtXMJONKSKcj_LXzZ06I5DPTc1iHohR0tR9Jtvyoe1bn3mvh-HaLFBv0mk7DrUVaZJc53XGQB_3vicHFQr7hk1qzSG_fL6AOwdPtljGWp4CEBGHuIbqnhwb8NC05TQOaOa4PgB_lda4VeE0KVE7etU4BAHEn7n_2ukLQJlkDRCpzn-_1WInQklUig2VOHiAAYvNgbuja0wq7-xbWB2lF-C5UTdnURBsh8bbnSyvxKL4RBkCkqk3I_wLIpMpDabPHo4eSoGdKtGsRorXeuv4iv_D-vZSPkjEGJ0-ISVy6ZKldoz52PYlrhXAOEzUR4pgADN5Vv1a-JFeo3e5l1UIbPxzXQ8wwh6hfWqB8thXEJ7BY9IeZqK7qvmawaKK6jiew=w1583-h890-no

520H choke



Whatever that is above no one can see it without logging into Google and I have no idea what my login is it's been so long lol. If you have a pic on your computer just drag it into the post and the forum will take care of it automatically. :thumb

You should be able to close it completely, I wonder if the cable has enough throw to do it before it hits the sheath. A pic would be nice.

Welcome to the Stables!
Last edit: 28 Jan 2019 16:25 by Geno.

Please Log in to join the conversation.

More
28 Jan 2019 16:24 #15166 by GoBucks
Replied by GoBucks on topic Starting Fluid - 520H Onan
Try this
Attachments:

Please Log in to join the conversation.

  • Geno
  • Offline
  • Administrator Supporter
  • Administrator Supporter
    Super Users
  • Wheel Horse Stables Owner
More
28 Jan 2019 16:28 #15167 by Geno
Replied by Geno on topic Starting Fluid - 520H Onan
It should close tight. I don't spend a lot of time near the puter and typing just don't get it done very fast. I could set it or find the problem in less than 30 seconds if it were here lol. This is why most people call me instead of asking for help on the forum I guess. :rolling

Welcome to the Stables!

Please Log in to join the conversation.

More
28 Jan 2019 16:31 #15168 by GoBucks
Replied by GoBucks on topic Starting Fluid - 520H Onan
This makes no sense. I'll have it closed, then it won't close again. Annoying.

Please Log in to join the conversation.

  • Geno
  • Offline
  • Administrator Supporter
  • Administrator Supporter
    Super Users
  • Wheel Horse Stables Owner
More
28 Jan 2019 16:35 #15169 by Geno
Replied by Geno on topic Starting Fluid - 520H Onan
Just sent you an email, call me lol. :tounge2

Welcome to the Stables!

Please Log in to join the conversation.

More
01 Feb 2019 22:19 #15183 by GoBucks
Replied by GoBucks on topic Starting Fluid - 520H Onan
I tried adjusting it several times on the phone with Geno today, this is the best I can do. Now I have an electrical issue, so I can test this to see if it's good enough.
Attachments:

Please Log in to join the conversation.

Time to create page: 0.314 seconds