de carbon advise

More
05 Jun 2015 21:48 #5430 by kudzu
de carbon advise was created by kudzu
I'm about to de-carbon my Tecumseh 10 hp and would like some opinions on the best way to do this. I'm un sure how to avoid getting some nasty stuff in the valve ports. This is my first de carbon, so any and all suggestions will be appreciated. Thanks
JUST BECAUSE SOMEBODY WROTE IT, DON'T MAKE IT RIGHT.

Please Log in to join the conversation.

More
06 Jun 2015 06:13 #5442 by GT 14
Replied by GT 14 on topic de carbon advise
Don't know how bad yours may be but before I would tear it down I would try Yamaha Ring Free.
www.amazon.com/Yamaha-Yamalube-Ring-Addi...rds=Yamaha+ring+free
1969 GT-18
1978 C-101
1983 C-225

Please Log in to join the conversation.

More
06 Jun 2015 11:15 #5468 by nappypappy
Replied by nappypappy on topic de carbon advise
Looks like some good stuff.......... :smile2
1985 416-8
520-H
You can lead a horse to water but you can't make him drink.
I can't see the forest for the trees.

Please Log in to join the conversation.

More
08 Jun 2015 10:52 #5541 by JustinW.73
Replied by JustinW.73 on topic de carbon advise
When I clean up the inside of engines me and Gary use a die grinder with sanding pad. We use on the top of the piston, top of valves, and the head. Keep the valves closed when doing it, and blast it with some air to get the loose sandy stuff off it when done.
1973 No Name 16
1966 856
1964 854
198? 520H
Way too many decks
1966 f100

Please Log in to join the conversation.

Time to create page: 0.458 seconds

WHS Menu