Another motor project

motor12
Topic Author
Offline
Supporter
Registered

12 Jul 2018 14:53 #14726 by motor12

Another motor project was created by motor12

Just finished this little Kohler K91RT, thought i would rebuild something different this time. As you can see its a gear reduction motor. The guy i bought it from said it didn't run and he was right. I replaced all seals, gaskets, bearings, coil, points, plug and condenser,cleaned up the block checked the bore and piston size installed new rings, put a rebuild kit in the carb and a bunch more stuff. This motor was a challenge to say the least. It started on the third pull and runs great. the one thing left to do is make a small guard to go over the chain sprocket, I don't want to get tangled in that thing.

1958/model RJ58
1964/model 854

Attachments:

Please Log in to join the conversation.

Geno
Offline
Administrator Supporter
Super Users
Wheel Horse Stables Owner

12 Jul 2018 19:40 #14727 by Geno

Replied by Geno on topic Another motor project

Wow that is a beauty. You have a knack for making them look just right. :10

Welcome to the Stables!

Please Log in to join the conversation.

nappypappy
Offline
Super Moderator
Registered
none

13 Jul 2018 05:39 #14730 by nappypappy

Replied by nappypappy on topic Another motor project

motor12 wrote: Just finished this little Kohler K91RT, thought i would rebuild something different this time. As you can see its a gear reduction motor. The guy i bought it from said it didn't run and he was right. I replaced all seals, gaskets, bearings, coil, points, plug and condenser,cleaned up the block checked the bore and piston size installed new rings, put a rebuild kit in the carb and a bunch more stuff. This motor was a challenge to say the least. It started on the third pull and runs great. the one thing left to do is make a small guard to go over the chain sprocket, I don't want to get tangled in that thing.

wow thats a beauty for sure.................... :woo