What are you up to?

Going through the sheets I got from a dealer that wants to be bought out. I have been running parts numbers all day long and my head is spinning. I have 758 part numbers to figure out and a lot of them the old 4 digit Wheel Horse numbers.

There are parts of all kinds for tractors, decks, D series, tons of wiring harnesses, even chrome hubcaps. There are 8 frames, hoods, fenders, dashes, transmission, blower, blade parts, you name it. I might have gotten half of them working on it all day today...

That's what I'll be up to most of the day tomorrow also.

way to nice of a week end here to be stuck behind a desk
been out side with spring clean up out side
measured up the back deck for a face lift
along with planing a chicken coop expansion
and did oil changes on 3 of the cars to day...

nappypappy wrote:

Trouty56 wrote:

nappypappy wrote:

Trouty56 wrote:

nappypappy wrote: well you have way to many blades from what I see...I know somebody that lives in Louisville Kentucky real good that needs one and you will never miss it.........

Nappy...I have a plow that came with a clunker....a hacked up short frame plow that has been extended for a long frame plus an axle bracket for it that I can bring to the show for a good price. It is all there but the angle lever looks like it may need modified a bit. Was going to CL it for 100 bucks up here to see if it generated any interest. Gotta start a little high ya know. I'm sure we could make it work for you.

I would like to see it before we agree on a price......I hope its not to much trouble to bring it to the show.......oh and maybe get a senior citizen discount.....

I'll get you some pictures when I have the next day off....FYI....I qualify for senior citizen discounts too ya know.....lol Don't worry....I won't ask for an arm and a leg.

Great on the pictures and no rush anyway..........oh and arms and legs is all I have left................yeah you give me senior discount and I give you the same that way we break even........

Here it is nappy....looks like it will work....half the price of a good one depending on what you figured to spend....

thanks for the pictures and yes the price is right or we can haggle or dicker.......my question is how does it hook on the back...u bolts?

Need to get some carriage bolts for it...It has an axle hitch there with it....but need 4 carriage bolts. Another thing it needs is a heavy wire for the grip on the lever....when you grab the lever it pulls a pin and then you can angle the plow. I'm sure we can make it work for you.

Trouty56 wrote: Need to get some carriage bolts for it...It has an axle hitch there with it....but need 4 carriage bolts. Another thing it needs is a heavy wire for the grip on the lever....when you grab the lever it pulls a pin and then you can angle the plow. I'm sure we can make it work for you.

Sounds great and I thank you and see you at the show................

Sorry I've been a little scarce this week, it's been a long rough one. I'm going to the house after I post this and this will be an earlier night than a lot of them...

We've been talking to a pretty big Wheel Horse dealer since last Friday whose been in it since 1964. We finalized this morning that we're buying the entire Wheel Horse parts department. I'll put up another post on that soon but we've been trying to make some room that we don't have lol. :rolling

Geno wrote: Sorry I've been a little scarce this week, it's been a long rough one. I'm going to the house after I post this and this will be an earlier night than a lot of them...

We've been talking to a pretty big Wheel Horse dealer since last Friday whose been in it since 1964. We finalized this morning that we're buying the entire Wheel Horse parts department. I'll put up another post on that soon but we've been trying to make some room that we don't have lol. :rolling

that sounds great.....

Geno wrote: Sorry I've been a little scarce this week, it's been a long rough one. I'm going to the house after I post this and this will be an earlier night than a lot of them...

We've been talking to a pretty big Wheel Horse dealer since last Friday whose been in it since 1964. We finalized this morning that we're buying the entire Wheel Horse parts department. I'll put up another post on that soon but we've been trying to make some room that we don't have lol. :rolling

Your going to need a time machine soon. :rolling4

Geno wrote: We've been talking to a pretty big Wheel Horse dealer since last Friday whose been in it since 1964. We finalized this morning that we're buying the entire Wheel Horse parts department. I'll put up another post on that soon but we've been trying to make some room that we don't have lol. :rolling

Wow! Fantastic News,

Congratulations.